Re: Someone please help me out?
Hello avanomi & welcome,
ADCS1 is bit 7 of the ADCON0 register, you would " set " this bit as ADCON0.7 = 1 or ADCON0 = %10000000 Microchip Data sheet PP 129 .
What it appears you are trying to do is to Disable the Synchronous Serial Port and use Port A as Digital I/O.
Data sheet PP 83/84 SSPCON register bit 5 enables / disables SSP set it to zero and you are golden. Remember this chip has several
Analog registers which have to be set to get digital I/O. ADCON0, ADCON1, ADRESH ADRESL . . . see page 43 for PortA registers, DO Use the index
of the Data Sheet under registers.
HTH
EDIT:
Page numbers could be off a bit due to Adobe reader showing different number from printed page, but close.
EDIT EDIT: PortE ADCON1, TRISE 0:2 For port E, watch out for TRISE.4 if set will upset PortD's use as I/O. PP50:52
Last edited by Archangel; - 19th July 2013 at 03:32.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
Bookmarks