18F6680 and portd problems.

[jkbh]

I have now tested with a 18F6585 chip and it is same problem with this chip.
The current drawn from each pin on portD is 0.2mA.Total of 1.6mA on portD so there is not to high load on the port.
So I guess that there is something that I have forgotten to turn off or something.
Now guys..Please help me!!

/Jimmy

[jkbh]

If I use ASM code in Picbasic it works.
I did like this!!

Startup:
asm
bsf LATD,5
endasm

pause 500


asm
bcf LATD,5
endasm

pause 500

adcin 1,AN1
adcin 2,AN2
adcin 3,AN3
ADCIN 5,AN4

goto startup


end


WHY does it not work if I simple use HIGH and LOW LATD.5
Is it a bug in PBP 2.44???

/Jimmy

[jkbh]

I solved the problem!

I had bad through plating holes on my PCB.Almost all PortD bits had bad connection on the second layer.Hav fix it now and the portD works great.

Thanks anyway!!
/Jimmy