Picki3 Unhandled exception has occurred in your application
I am getting an error when I use Pickit3. The error is:
"Unhandled exception has occurred in your application. If you click continue, the application will ignore this error and to continue. If you click Quit, the application will close immediately. Data parameter cannot be longer than 136bytes. Parameter name: Data"
I have the latest Mplab which I reinstall but in vain. If Pickit 3 is not attached on the USB the Pick program come on. If the pickit3 is attached to the USB and start the Pick3 program I get "Pick 3 has stopped working, Windows is checking for solution to the problem"
If I unplug the pickit3 and open the Pickit 3 program then plug the pickt3 unit to the USB then click Tools, Check communication I get the error above. I can see there are a lot of activities on the LED of he Pickit3. The status and active LED flash until the error.
Operating system: Windows 7 64bit, Mplab 8.9
I am pulling my hair and really don't know what else to do. Pleas any leads to resolve the problem. Many thanks in advance.
Regards,
Yves
Bookmarks