Hi Ioannis,

I tried that and for some reason it won't compile, errors with "Expected ] " but it is all correct ??



Since then I've changed things around to suit the cable distance I need between the rf module and the pic.

I've separated the rf module and also the 3.3v regulator, so the rf module has it's own supply. I then replaced the 3.3v regulator on the pic board with a 5v version.

So, pic and lcd at 5v. Rf module at 3.3v. Currently separated by 1m of cable just testing.

I also rewired and connected the module to the hardware serial port. This means that the serial is better able to cope with the distance and hopefully up to scratch for speed.

At the moment I seem to have disturbed the basic operation of the system, the switch for changing the led status is causing a reset. I need to investigate. I should have it sorted later and will report back.

Rob