PIC12F683, POT & RCTIME not supported?

Results 1 to 8 of 8

Threaded View

  1. - 5th June 2013, 12:06 #3
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default Re: PIC12F683, POT & RCTIME not supported?

    To be known ...

    POT only works "correctly" @ 4 Mhz and using the components shown in the Holy manual.

    Now, having a Chip with onboard ADC ... it's a shame and a nonsense using such an awful command ( not linear, need special value components ... )

    RCTime works perfectly ... but, here again, response is not linear and the range it must be used calculated with care to get enough granularity ...

    Alain
    Last edited by Acetronics2; - 5th June 2013 at 12:12.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. PULSIN & RCTIME resolution calculation
    By flotulopex in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 5th January 2010, 14:34
  2. POT and RCTIME instructions
    By ruijc in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 14th November 2007, 15:47
  3. can someone help me with RCTIME
    By gandora in forum mel PIC BASIC Pro
    Replies: 25
    Last Post: - 17th May 2007, 00:30
  4. Using ADCIN or POT/RCTIME?
    By TonyA in forum mel PIC BASIC Pro
    Replies: 11
    Last Post: - 16th April 2006, 18:37
  5. I'm getting strange Results using POT or RCTIME on PortB (or GPIO Port)
    By Melanie in forum FAQ - Frequently Asked Questions
    Replies: 0
    Last Post: - 15th July 2004, 20:01

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules