Re: Microcode studio not showing data, though it is receiving it
Tina, First you need to check your Microcode >> Usb >> RS-232 >> Max-232. With everything connected except the Blue tooth module, short the RX/TX lines comming from the TTL level side of the Max-232. Now type something on your Microcode studio terminal application and you should see (if everything is wired correctly) the letters or numerals you are typing. If not, check each connection in the string. Once you have echo's of the typed characters then replace the short at the TTL side of the Max-232 with the connections to your Blue tooth module. Mine works GREAT.....
Dave Purola,
N8NTA
EN82fn
Bookmarks