max frequency on pwm channel 16f88

[queenidog]

Thank you all! I can't believe I've been misreading the PBP3.0 manual wrong all this time regarding the LOWEST usable frequency. It is NOT highest. And there in the spec sheet, in table 9-3 which I've not seen before (because I was just letting the HPWM command take of stuff), is a table of frequencies.

I'm on a roll.

Thanks again guys.

[rmteo]

BTW, the numbers in table 9-3 are not the highest PWM frequency that the PIC can attain. It can reach much higher frequencies than those stated - depending on the resolution you want.