Assembler Error Msg?

[AvionicsMaster1]

Define must be in CAPS for it to work. i.e. #DEFINE OSC 24

[rocket_troy]

Define must be in CAPS for it to work. i.e. #DEFINE OSC 24

The editor that came with PBP3 -- Microcode Studio MCSX (the apparent successor to MCS) -- appears to automatically adjust/correct the "DEFINE" to lowercase. I'm assuming this is intentional??? Nevertheless, it's not the cause of the compiling error as the error still appears even if I remove that entire line from the code.

Regards,

Troy

[Ioannis]

Are you sure you have selected the correct chip on the MCSX drop down menu?

I suppose you have a new version of MPLAB and a new directory you installed PBP. Not over the old one?

Ioannis

[Charlie]

I'm not a 3.0 user either, but the 18F13K50 does not have onboard debug support, so the new compiler may give a warning when invoking DEBUG, even if the DEFINE is to turn it off. If you comment out that line, does the error go away?

[rocket_troy]

Ioannis,
"Yes" to all those questions except MPLAB. I can't recall installing a new version of MPLAB onto my machine unless it was part of the PBP3 installation process?

Regards,

Troy

[rocket_troy]

I'm not a 3.0 user either, but the 18F13K50 does not have onboard debug support, so the new compiler may give a warning when invoking DEBUG, even if the DEFINE is to turn it off. If you comment out that line, does the error go away?

I have considered this, but since it's one of the "system" files(?) ie. not my input, I thought I'd hold off before I received some feedback here 1st. I'll found out how to install a new version of MPLAB onto my machine 1st, then if that does nothing, I'll comment that line out.

Thanks,

Troy

[Charlie]

If you choose to upgrade MPLAB, don't delete your old version of MPLAB, but rather try a fresh install in a different directory. Many people that try MPLAB X go back in short order. YMMV.

As to my comment - I'm simply suggesting that perhaps Version 3 is less tolerant than 2.6 was of trying to define something that does not exist - certainly that's what the error says to me. Those defines are not sacred. You can add and remove them as you see fit. Don't worry about even editing "system files" - feel free to experiment. Just keep a pristine copy of the original files so you can go back if you mess up, and then experiment to your heart's content. I don't think it is possible to execute a "halt and catch fire" instruction on modern devices. .

[rocket_troy]

Charlie,
I commented out that line and it appears to compile without issue - thanks for the great advice.

The really weird thing is this error would appear for virtually any simple program I tried compiling with that processor selected, but the largest & most complex program I've written (~1000 lines) compiled perfectly - go figure!

Regards,

Troy

[Brassfly]

The editor that came with PBP3 -- Microcode Studio MCSX (the apparent successor to MCS) -- appears to automatically adjust/correct the "DEFINE" to lowercase. I'm assuming this is intentional??? Nevertheless, it's not the cause of the compiling error as the error still appears even if I remove that entire line from the code.

Regards,

Troy

Troy,

Microcode Studio MCSX defaults to lower case for the reserve words, but you can change that. To do so, click on the 'View' menu, then select 'Editor Options'. Now select the 'Highlighter' tab and at the bottom of that tab is the 'Reserve Word Formatting' area. Just select the 'Uppercase all' option and your "DEFINE", as well as all reserve words, will be in caps.

[rocket_troy]

Troy,

Microcode Studio MCSX defaults to lower case for the reserve words, but you can change that. To do so, click on the 'View' menu, then select 'Editor Options'. Now select the 'Highlighter' tab and at the bottom of that tab is the 'Reserve Word Formatting' area. Just select the 'Uppercase all' option and your "DEFINE", as well as all reserve words, will be in caps.

Thanks for the tip Brassfly.

Cheers,

Troy