Wireless modules - help with code not working

[tasmod]

Hi Loannis,

Thanks for the help.

I changed the pause to 1 second but it made no difference. It doesn't move on past the Serin unless I remove the 'DEC signal' part so it doesn't reach the Sub.

I removed the variable parts of the Serout/In and it will work as a one shot. Add a DEC anything and it won't receive it.

So Field receives "BOB" and will fire relay if I comment out the 'if then' and add a HIGH relay but will not work on a variable value.

Oh yes, I'm just testing direct connections at moment. When it works as expected I will add the modules.

I noticed the post of the code had odd formatting, some caps, some lower case. Strange as this was done with Microcode Studio. Just to be sure I copied it into Notepad and wrote the commands as necessary in capitals. No change when compiled, didn't work. I thought the odd 'SIGNAL' in caps was causing a problem. It wasn't written in caps.

Rob

[Ioannis]

WelL I missed that.

You DO NOT HAVE to place the DEC modifier since what you send is just a binary number.

So discard the DEC from your SERIN and you will be OK.

Ioannis

[tasmod]

OK as you can guess I'm at the pc doing the programming right now.

I'm sending SEROUT2 PortA.3,T9600,["BOB",redstop] where variable redstop is allocated redstop = 1

on the other unit ---

I'm trying to receive SERIN2 PortA.2,84,[WAIT("BOB"),signal] to put the received value into variable 'signal' .

If signal =1 then gosub

Whatever combination I try, straight or DEC it doesn't respond.

Am i doing something stupid?

Rob

[Ioannis]

1. Serout2 and T9600 are not compatible. Use 84 instead.

2. Are you sure of the correct ports and connections? Try it directly from PIC to PIC.

Ioannis

[tasmod]

Yesssss. That was it !

Read the manual so many times I was confused over what worked with what. Changed to 84 and it works.

Thank you Loannis

[Ioannis]

Glad you got it.

It is a good feeling when it works, isn't it?

Ioannis