if it's running at 3.3v, then yes, it'll output at 3.3 logic levels, and there's always the alternative of using something like a voltage divider with a 1.8k ohm and 3.3k ohm resistors if you need to convert the voltage from 5v to 3.3v.
|
Re: Wireless modules and simple setup, what is required?
if it's running at 3.3v, then yes, it'll output at 3.3 logic levels, and there's always the alternative of using something like a voltage divider with a 1.8k ohm and 3.3k ohm resistors if you need to convert the voltage from 5v to 3.3v.
Last edited by Chirpy; - 26th March 2013 at 15:21.
|
Re: Wireless modules and simple setup, what is required?
Thanks for that.
I've decided to go with the Ciseco hi power transceivers.
I've written some preliminary code based upon Dave Houstons code. I need to add prelim ID followed by string then acknowledgement just in case of power outage.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks