Wireless modules and simple setup, what is required?


Results 1 to 18 of 18

Threaded View

  1. #13
    Join Date
    Dec 2011
    Location
    IO93ok
    Posts
    190


    Did you find this post helpful? Yes | No

    Default Re: Wireless modules and simple setup, what is required?

    Hi Roger and all,

    Sorry I've not replied but I'm on a limited internet connection.

    Thanks for that info Roger. Unfortunately the site is full of 433MHz stuff already and they are suffering from clashes occasionally, hence 868Mhz requirement.

    I believe the Ciseco modules are serial input but transparent modules as well, I'm not sure regarding this, anyone know better ?

    They do have a longer range with suitable smaller sized aerials than 433.

    His requirement is up to 3km range in semi open environment, point to point. They will be used in parkland with odd tree here and there. I will be able to carry out range tests once finalised and suspect that one yagi and one whip will suffice. If not, two yagis is not out of the question.

    They will be in use for just one day occasionally during the year, probably no more than 3 times. They will be temporary and fully portable.

    Rob
    Last edited by tasmod; - 4th April 2013 at 09:41.

Similar Threads

  1. Low latency Wireless RF transceiver modules?
    By mark155 in forum General
    Replies: 0
    Last Post: - 4th March 2010, 05:20
  2. Wireless modules FCC approved
    By Michael in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 7th September 2008, 02:23
  3. Software RS232 and wireless modules
    By Michael in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 17th August 2008, 05:27
  4. CM02 and RF04 wireless modules problem
    By vladimir059@hot in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 14th December 2006, 10:32
  5. Wireless comms with Linx LR modules
    By telemark in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 2nd July 2006, 01:58

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts