Newhaven Serial COG 2X16 LCD

Closed Thread
Results 1 to 6 of 6

Hybrid View

  1. - 20th March 2013, 04:44 #1
    Neosec's Avatar
    Neosec
    Neosec is offline Junior Member
    Join Date
    May 2008
    Posts
    31

    Did you find this post helpful? Yes | No

    Default Re: Newhaven Serial COG 2X16 LCD

    Good tip 'Magic, thanks. Is 3.3 Volts and 3 Volts interchangeable?
  2. - 20th March 2013, 06:09 #2
    HenrikOlsson's Avatar
    HenrikOlsson
    HenrikOlsson is offline Contributor
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,612

    Did you find this post helpful? Yes | No

    Default Re: Newhaven Serial COG 2X16 LCD

    Always read the datasheet for the device/part in question.
    For this display it quite clearly states that Vdd can be between 2.7 and 4.5V so 3 or 3.3V are both well within spec.

    /Henrik.
« Previous Thread | Next Thread »

Similar Threads

  1. Help Identify Pin Names from Datasheet on Serial/Parallel LCD/VFD
    By wdmagic in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 18th March 2013, 22:52
  2. Newhaven 4x40 LCD, issues!
    By MOUNTAIN747 in forum mel PIC BASIC Pro
    Replies: 27
    Last Post: - 18th October 2012, 22:23
  3. Need advice with LCD 2x16
    By fratello in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 26th April 2011, 06:58
  4. Code that worked with WINDSTAR LCD doesn't work with Newhaven LCD?
    By jellis00 in forum mel PIC BASIC Pro
    Replies: 36
    Last Post: - 14th March 2011, 18:38
  5. small 2X16 LCD
    By Ron Marcus in forum Off Topic
    Replies: 2
    Last Post: - 26th October 2007, 20:37

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules