Quad Encoder Problem

Results 1 to 37 of 37

Threaded View

  1. - 17th March 2013, 15:20 #18
    RossWaddell's Avatar
    RossWaddell
    RossWaddell is offline Member
    Join Date
    Jan 2010
    Posts
    263

    Did you find this post helpful? Yes | No

    Default Re: Quad Encoder Problem

    But if the interrupts are meant to fire on either a rising or falling edge, then going from '00' to '10' has only one edge (A rises from 0 to 1; B stays the same). The 00 to 10 state change represents one detent, right?

    I got this ISR code from another post (http://www.picbasic.co.uk/forum/show...5396#post25396) and it seemed to work back then (incrementing MotorRPM by 1)
    Last edited by RossWaddell; - 17th March 2013 at 15:23.
« Previous Thread | Next Thread »

Similar Threads

  1. RF600E & RF600D encoder/decoder problem
    By Megahertz in forum Off Topic
    Replies: 0
    Last Post: - 17th April 2012, 18:18
  2. using Quad UART
    By harryweb in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 30th April 2011, 01:13
  3. quad encoders
    By cpayne in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 13th March 2007, 18:49
  4. Quad encoder problems
    By smitty505000 in forum mel PIC BASIC Pro
    Replies: 51
    Last Post: - 5th October 2006, 23:44
  5. Encoder problem
    By precision in forum mel PIC BASIC Pro
    Replies: 6
    Last Post: - 12th September 2006, 23:21

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules