Android Basic Alternative

[spcw1234]

So let's say I have 2 garage door openers, I could pair with the phone, send that header and data defining if PIC should activate relay for left or right door button and then unpair phone?

Just making sure I can get 2 phones to be able to open either door (project #1).

Robert

The only problem I see here is that it takes 30 seconds to pair up every time, might be able to do it faster but I haven't figured it out. That might not be a big deal, but not as simple as a normal garage door opener.

[Demon]

30 seconds would indeed suck.

[ardhuru]

After wrapping my brain around the problem, I finally stumbled across this thread.

I am trying to almost exactly the same thing; display a packet of 6 bytes spit out by the pic on an Android, using B4A in 6 different boxes.

The B4A side of things is completely unchartered territory for me; just figured out the advantages of using the prefix mode.

Now, I have a few questions; Shawn, in post#16, you have defined the prefix length to 22. But the decimal digits add up to 25. How is that?

As I said, my expertise on B4A is extremely mediocre; could you please show us the complete code on that side? For example, I am unclear (PLEASE forgive my complete ignorance, I suspect this is quite straightforward) how to fill up individual labels with the incoming data bytes from your Update_Display routine.

Thanks!

Anand

[ardhuru]

in post#16, you have defined the prefix length to 22. But the decimal digits add up to 25. How is that?

Sorry, my mistake about the prefix length.

Still struggling with the other aspect, though..