need code for ir on/off switch 12f629

[Heckler]

There is a pretty good APP NOTE over on the Parallax Basic Stamp web site.
I tried to attach the .pdf file here but it fails.

If you google "parallax remote ir" you will get a couple of hits on IR protocol and implimenting IR comms using BASIC.

PBP is quite similar to the BASIC used in the Basic Stamp microcontroller. So it should not be too dificult to apply what is contained in those app notes to PBP.

Certainly if the Basic Stamp can do it then most any PIC can do it better

[FADI984]

Thank you mr.heckler ...it is realy good site and i got some good ideas from it ...and i traid to write code .. but the main proplem is that thair codecs depend on known ir protocol like sony or rc5 but my need is treating with unknown ir protocol (from any remot control) .................realy i spend 10 hour in one set on net and i failed ....thair are many projects about ir dimmer circuit depend on the same idea but the programmers execuse about orginal code and offer just hex file

[Ioannis]

Download this file. It explains all these IR stuff you need.

Ioannis

[FADI984]

It is still not solved.....