PICbasic and 40X4 lines LCD


Closed Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2008
    Location
    Varese , Italy
    Posts
    326

    Default PICbasic and 40X4 lines LCD

    Good day ,
    I have to interface a 40 chars by 4 lines LCD to my PIC micro . There are two enable lines ( E1 and E2 ).
    E1 is for the first HD4470 which controls the first and second line,
    E2 is for the second HD4470 which controls the 3rd and 4th line.

    Any help in using PICbasic Pro for this application ?

    Thanks
    Regards,
    Ambrogio
    IW2FVO
    North Italy

  2. #2
    Join Date
    Jul 2003
    Location
    Colorado Springs
    Posts
    4,959


    Did you find this post helpful? Yes | No

    Default Re: PICbasic and 40X4 lines LCD

    It's essentially 2 separate displays of 40x2.

    http://www.picbasic.co.uk/forum/showthread.php?t=626
    DT

Similar Threads

  1. Interfacing with Arduino I2C LCD
    By norohs in forum Documentation
    Replies: 47
    Last Post: - 30th May 2017, 18:53
  2. LCD using 4 data lines, Lab X1
    By queenidog in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 20th January 2013, 23:10
  3. Serout2 on LCD Shows Junk Characters
    By RossWaddell in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 14th January 2013, 15:51
  4. LCD Low Power
    By kduck63 in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 5th December 2012, 00:05
  5. LARGE 40x4 LCD Display
    By Art in forum Adverts
    Replies: 3
    Last Post: - 15th December 2008, 09:19

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts