I'm betting if you had a resistor pulling the pin low, say a 10k, you'd see it going low. I'm not familiar with the 18f4620 but on a 12f683 it needs some kind of load to pull the pin low. Don't have to be alot but something.
|
Re: TOGGLE will not go LOW
I'm betting if you had a resistor pulling the pin low, say a 10k, you'd see it going low. I'm not familiar with the 18f4620 but on a 12f683 it needs some kind of load to pull the pin low. Don't have to be alot but something.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks