LOOKUP2 not working?

[Charlie]

I thought I'd experiment a bit with Darrel's DT_Analog. I got my A-D working, then included DT_Analog.pbp and I keep getting a compile time error
Error[113] c:\pbp\pbpppil43.lib 702 .. Symbol not previously defined (LOOKUP2).

I'm using PBP 2.6 and the device is a 16F1828. Any ideas?

[Darrel Taylor]

Charlie,

Have you been modifying the Libraries?

There is no such file as pbpppil43.lib.

[Charlie]

Not modifying libraries, but not using spell check either. It should be pbppi14e.lib
I did recently install MPLAB X for testing, but put it in a completely different directory structure.

[mackrackit]

MPLAB X for testing

OH NOOOooooooooo......

Just use the MPLAB that shipped with PBP and save yourself the headache.

[Charlie]

OH NOOOooooooooo......

Just use the MPLAB that shipped with PBP and save yourself the headache.

I honestly think I am doing that.
But this is a very strange error... My next step is to try to recreate the fault without Darrel's code, but first I need to learn about LOOKUP2.

[mackrackit]

LOOKUP2 is just the big brother of LOOKUP, so here are a couple of examples.
http://melabs.com/samples/PBP-mixed/lookup.htm

And this will place the value of a string into a variable

BUFFERQ  VAR BYTE[13] 
B0          VAR BYTE
B1          VAR BYTE 
'#####################
FOR B0 = 0 TO 12
    LOOKUP B0,[" MACKRACKIT",10,13],B1         
    BUFFERQ(B0) = B1
    NEXT B0