Missing "TENS" digit

Results 1 to 5 of 5

Threaded View

  1. - 8th October 2012, 00:38 #1
    yasky1's Avatar
    yasky1
    yasky1 is offline Junior Member
    Join Date
    Jun 2011
    Posts
    3

    Default Missing "TENS" digit

    I made a 5 volt meter to monitor circuits. I have redesigned the circuit to monitor 12 volts. The circuit works fine, no issues there. My problem is in my program. The program doesn't show the "TENS" digit on the LCD Display. When I connect voltage to monitoring terminal, the LCD displays 2.05 volts instead of 12.05 volts. Could you look at my program and let me know where I need to modify it. Thanks, Greg
    Attached Images Attached Images
« Previous Thread | Next Thread »

Similar Threads

  1. How can I "see" if a PCF8574 is "alive" in the I2C bus
    By nomada in forum Serial
    Replies: 3
    Last Post: - 15th October 2012, 08:06
  2. "overwriting previous address contents" - NOT the usual fuse problem
    By pic18f442 in forum mel PIC BASIC Pro
    Replies: 8
    Last Post: - 3rd March 2011, 22:20
  3. Transistor Selection for Switching Relay Coil-with a little bit of info on my "ARSC"
    By rxforspeed in forum Schematics
    Replies: 24
    Last Post: - 7th November 2008, 04:41
  4. "Serial" 4-Digit Seven-Segment LED Display Modules
    By Bruce in forum Adverts
    Replies: 2
    Last Post: - 22nd January 2008, 14:25
  5. " Help please re "CTCSS and getting a sine wave out" from Mathew 11th March 2004
    By Bitzn in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 16th February 2005, 20:05

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules