Reading sensors with 3.3v(beginner)

Closed Thread
Results 1 to 18 of 18

Hybrid View

  1. - 26th September 2012, 02:51 #1
    Ramius's Avatar
    Ramius
    Ramius is offline Contributor
    Join Date
    Mar 2011
    Location
    Los Angeles, California
    Posts
    322

    Did you find this post helpful? Yes | No

    Default Re: Acceleromter module test(3.3v) + Pic16F887 (5v)

    Hi Tacbanon!
    I would be very interested in your results with your accelerometer as I am in need of a tilt sensor (pitch and roll). I see you are looking for a barometric sensor and you may wish to look at http://www.picbasic.co.uk/forum/showthread.php?t=16457 which is a depth sensor which should work for altitude as well. If nothing else there is a 3.3v to 5.0v level converter that may be useful for your project.

    Best, Ed
  2. - 26th September 2012, 08:14 #2
    tacbanon's Avatar
    tacbanon
    tacbanon is offline Member
    Join Date
    Jun 2011
    Location
    Philippines
    Posts
    223

    Did you find this post helpful? Yes | No

    Default Re: Acceleromter module test(3.3v) + Pic16F887 (5v)

    Greetings Ramius!
    Thanks for your interest, and very thankful for the guide, and I will try this(3.3v to 5.0 converter).

    regards,
    tacbanon
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules