Altering a variable in a loop.

Closed Thread
Results 1 to 27 of 27

Hybrid View

  1. - 15th September 2012, 10:04 #1
    HenrikOlsson's Avatar
    HenrikOlsson
    HenrikOlsson is offline Contributor
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,612

    Did you find this post helpful? Yes | No

    Default Re: Altering a variable in a loop.

    Or
    Code:
    PortD = ADC.LowByte   ' Or ADC.Byte0
PortB.0 = ADC.8
PortB.1 = ADC.9
    Or perhaps even
    Code:
    PortD= ADC.LowByte
PortB = ADC.HighByte
    But the later will write "fill" the upper 6 bits of PortB with zeros (or whatever is in the upper 6 bits of the ADC variable) which may or may not be an actual problem.

    Neither of this has anything to do with the original question of course, sorry about that.

    /Henrik.
  2. - 15th September 2012, 14:03 #2
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default Re: Altering a variable in a loop.

    One from the Queen
    http://www.picbasic.co.uk/forum/showthread.php?t=544
    Dave
    Always wear safety glasses while programming.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules