sorry
I did not think there was a need to comment on the above lines 89, as from what I understand, the use of [TabIndex], is to control a particular set of values ​​... in this case, bits of PORTD ...
Here is part of code syntax error affected the ...

....
PORTD.0 = D0
PORTD.1 = D1
PORTD.2 = D2
PORTD.3 = D3
PORTD.4 = D4
PORTD.5 = D5
PORTD.6 = D6
PORTD.7 = D7
PORTB.0 = D8
PORTB.1 = D9

GoTo Inicio

[TabIndex]
Value=0