Serout2 at 9600 problem

[Fujimanme]

Firstly, use TOGGLE Led_1.... as your LED will never go off

Second, how are you verifying the rate is 2400? What terminal program are you using?

[nuno106]

Hello,

Thank for your answers.

I'm using a 18F2550. To verify the baud rate, i'm using the hyperterminal from windows.

I think that my problem is in definition of the Pic, I not understand why we need to define the oscilator 2 times:

DEFINE OSC 8
__CONFIG _CONFIG1L, _PLLDIV_2_1L ; Divide by 2 (8 MHz oscillator input)

Thanks,
Nuno

[mackrackit]

Try this

@   __CONFIG   _CONFIG1L, _PLLDIV_2_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
@   __CONFIG   _CONFIG1H, _FOSC_HSPLL_HS_1H

DEFINE OSC 48