Compiling error on Elapsed timer

[tacbanon]

Hi everyone, I'm trying out Darrel's sample code from http://darreltaylor.com/DT_INTS-18/elapsed.html.

asm
    __CONFIG    _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    __CONFIG    _CONFIG1H, _FOSC_HSPLL_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    __CONFIG    _CONFIG2L, _PWRT_ON_2L & _BOR_ON_2L  & _BORV_2_2L  & _VREGEN_ON_2L   
    __CONFIG    _CONFIG2H, _WDT_OFF_2H 
    __CONFIG    _CONFIG3H, _MCLRE_ON_3H & _LPT1OSC_OFF_3H & _PBADEN_OFF_3H & _CCP2MX_ON_3H 
    __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _ICPRT_OFF_4L  & _XINST_OFF_4L & _DEBUG_OFF_4L 
endasm

DEFINE    OSC 48
DEFINE LCD_DREG PORTB
DEFINE LCD_DBIT 0
DEFINE LCD_EREG PORTB
DEFINE LCD_EBIT 5
DEFINE LCD_RSREG PORTB
DEFINE LCD_RSBIT 4
DEFINE LCD_BITS 4
DEFINE LCD_LINES 2
DEFINE LCD_COMMANDUS 2000
DEFINE LCD_DATAUS 50

INCLUDE "DT_INTS-18.bas"     ' Base Interrupt System
INCLUDE "ReEnterPBP-18.bas"
INCLUDE "Elapsed_INT.bas"  ; Elapsed Timer Routines

ASM
INT_LIST  macro    ; IntSource,        Label,  Type, ResetFlag?
        INT_Handler   TMR1_INT,  _ClockCount,   PBP,  yes
    endm
    INT_CREATE            ; Creates the interrupt processor
ENDASM

@   INT_ENABLE  TMR1_INT  ; Enable Timer 1 Interrupts  

GOSUB ResetTime           ' Reset Time to  0d-00:00:00.00
GOSUB StartTimer          ' Start the Elapsed Timer

Main:
  IF SecondsChanged = 1 THEN  
     SecondsChanged = 0
     LCDOUT $FE,2, DEC Days,"d-",DEC2 Hours,":",DEC2 Minutes,":",DEC2 Seconds
  ENDIF
GOTO Main

But I'm getting some error.

I'm using pic18f4550, what do I'm missing in the process?

Thanks in advance,
tacbanon

[Darrel Taylor]

INCLUDE "DT_INTS-18.bas" ' Base Interrupt System
INCLUDE "ReEnterPBP-18.bas"
INCLUDE "Elapsed_INT.bas" ; Elapsed Timer Routines

You need to use the 18F version of the Elapsed Timer.
http://darreltaylor.com/DT_INTS-18/downloads.html

[tacbanon]

Thank you for the reply and for the great work DT...

/tacbanon