Problems with PICKit 2 and Microcode Studio


Results 1 to 11 of 11

Threaded View

  1. #9
    Join Date
    Apr 2007
    Location
    Santiago, Chile
    Posts
    77


    Did you find this post helpful? Yes | No

    Default Re: Problems with PICKit 2 and Microcode Studio

    Hi Dave,

    I have attached a photo of my setup. The programming cable that I use is the same as I used for the EPIC except the MCLR pin had to be swapped position.
    The PIC is powered by the board and the PICKit2 is set to Automatic power detect. It seems to be programming fine when the code is right.
    I really as stumped with this....

    Regards
    Chris
    Attached Images Attached Images  

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts