Software reset - What am I doing wrong?

[Christopher4187]

This is what Microchip uses for the config files. When their program is loaded, the power up sequence works fine so I don't think my issue is in the config file. If I can get the software reset to work correctly I would be golden.

#pragma config PLLDIV   = 5         // (20 MHz crystal on PICDEM FS USB board)
        #pragma config CPUDIV   = OSC1_PLL2   
        #pragma config USBDIV   = 2         // Clock source from 96MHz PLL/2
        #pragma config FOSC     = HSPLL_HS
        #pragma config FCMEN    = OFF
        #pragma config IESO     = OFF 
        #pragma config PWRT     = OFF 
        #pragma config BOR      = OFF
        #pragma config BORV     = 3
        #pragma config VREGEN   = ON      //USB Voltage Regulator
        #pragma config WDT      = OFF
        #pragma config WDTPS    = 32768
        #pragma config MCLRE    = ON
        #pragma config LPT1OSC  = OFF
        #pragma config PBADEN   = OFF
      #pragma config CCP2MX   = ON
        #pragma config STVREN   = ON
        #pragma config LVP      = OFF
        #pragma config ICPRT    = ON       // Dedicated In-Circuit Debug/Programming
        #pragma config XINST    = OFF       // Extended Instruction Set
        #pragma config CP0      = OFF
        #pragma config CP1      = OFF
      #pragma config CP2      = OFF
      #pragma config CP3      = OFF
        #pragma config CPB      = OFF
      #pragma config CPD      = OFF
        #pragma config WRT0     = OFF
        #pragma config WRT1     = OFF
      #pragma config WRT2     = OFF
      #pragma config WRT3     = OFF
        #pragma config WRTB     = OFF       // Boot Block Write Protection
        #pragma config WRTC     = OFF
      #pragma config WRTD     = OFF
        #pragma config EBTR0    = OFF
        #pragma config EBTR1    = OFF
      #pragma config EBTR2    = OFF
      #pragma config EBTR3    = OFF
        #pragma config EBTRB    = OFF

EDIT: My configs do match Microchips, I just changed them today to try and rectify this issue.