Quote Originally Posted by HenrikOlsson View Post
Hi Christopher,
The include files can be either in the same directory as the main source file (the one you're compiling "from") or in the root PBP folder. If you want to have them in any other place you need to specify the full path in your INCLUDE statement, like INCLUDE "D:\MyIncludes\ThisOrThatFile.pbp"
Awesome. It's the best thing since sliced bread!

Quote Originally Posted by HenrikOlsson View Post
The manual says that USBSERVICE needs to be called at least every 10ms. SEROUT2 CAN take a conciderable amount of time depending on the baudrate and actual amount of data. Lets say you're sending 5 bytes at 2400 baud, each byte is 10bits including a start- and a stopbit so thats 50/2400=21ms. And that's for the actual bitbanging of the pin.
Ouch. I guess that explains why it's not working. However, I'm using 9600 but it looks like I'm still over the 10mS limit. I'll have to see if I can rework my code just for the design phase. Would you happen to know how long parallel LCD's take to execute?