18F2550 and Blink Led

[CuriousOne]

Absolutely the same. Does it compiles for you?

[mackrackit]

This is what I tested.
Changed the config to internal though..
Compiles fine.

#CONFIG
    __CONFIG _CONFIG1L, _PLLDIV_5_1L & _CPUDIV_OSC1_PLL2_1L & _USBDIV_2_1L
    __CONFIG _CONFIG1H, _FOSC_INTOSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    __CONFIG _CONFIG2L, _PWRT_OFF_2L & _BOR_ON_2L & _BORV_3_2L & _VREGEN_ON_2L
    __CONFIG _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
    __CONFIG _CONFIG3H, _CCP2MX_ON_3H & _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H
    __CONFIG _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _XINST_OFF_4L
#ENDCONFIG

 DEFINE OSC 8 
 ADCON1 = %00001111
 CMCON = 7
 OSCCON = %01110000
 TRISB = %00000000
 
 START:
 LATB.2 = 1
 PAUSE 250
 LATB.2 = 0
 PAUSE 250
 GOTO START

[CuriousOne]

Strange, gives the same error here, might I need to install update or something similar?

[mackrackit]

This is the best I can find that sorta refers to your problem
http://support.melabs.com/threads/54...config-length?
but I do not think it applies.

Maybe try re-installing PBP3? Maybe it became corrupt ?

[CuriousOne]

Removed PBP, removed mplab and all associated apps, downloaded fresh copy of PBP, installed, still same error.

[CuriousOne]

Tried to follow this method:

http://melabs.com/support/mplab.htm

This time I get: Whitelist: Processor 18F2550 disabled in this version of PBP.
To obtain additional device support, visit melabs.com.*

Edition is student edition and 18F2550 is definitely included.

[CuriousOne]

Restarted the PC, and now compile trough MPLAB works fine, but it is not handy to do so.

[CuriousOne]

Figured out. Access restriction rules were causing the problems. Disabled UAC and it now works just fine!