Goto the *.inc file in the PBP directory and comment out the config lines so it looks like this:
Code:
;****************************************************************
;*  18F4685.INC                                                 *
;*                                                              *
;*  By        : Leonard Zerman, Jeff Schmoyer                   *
;*  Notice    : Copyright (c) 2008 microEngineering Labs, Inc.  *
;*              All Rights Reserved                             *
;*  Date      : 09/15/08                                        *
;*  Version   : 2.60                                            *
;*  Notes     :                                                 *
;****************************************************************
        NOLIST
    ifdef PM_USED
        LIST
        "Error: PM does not support this device.  Use MPASM."
        NOLIST
    else
        LIST
        LIST p = 18F4685, r = dec, w = -311, w = -230, f = inhx32
        INCLUDE "P18F4685.INC"	; MPASM  Header
     ;   __CONFIG    _CONFIG1H, _OSC_HS_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
     ;   __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
     ;   __CONFIG    _CONFIG3H, _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H
     ;   __CONFIG    _CONFIG4L,  _STVREN_ON_4L & _LVP_OFF_4L & _BBSIZ_1024_4L & _XINST_OFF_4L
        NOLIST
    endif
        LIST
EEPROM_START	EQU	0F00000h
BLOCK_SIZE	EQU	64
Then in your code;
Code:
'18F4685 TEST

    @ __CONFIG    _CONFIG1H, OSC_IRCIO67_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    @ __CONFIG    _CONFIG2H, _WDT_ON_2H & _WDTPS_512_2H
    @ __CONFIG    _CONFIG3H, _PBADEN_OFF_3H & _LPT1OSC_OFF_3H & _MCLRE_ON_3H
    @ __CONFIG    _CONFIG4L,  _STVREN_ON_4L & _LVP_OFF_4L & _BBSIZ_1024_4L & _XINST_OFF_4L