pause puts me in sleep mode

[John C]

Edward is PORTC.2 set to digital using the CMCON Register

[EDWARD]

k thanks for the input guys but i finally got it working today. for some reason the solenoid cant be programmed to stay on for more than a few milla seconds, not sure why this is happening. if I PULSOUT PORTC.2, 10 (ive got a 4mhz osc) itll work, and i havent done too much fiddling around yet but im sure there is maximum PULSOUT time that will work with this design. thanks for all the help guys I do appreciate it. thanks for all the replys NAV. but as for my problem i think i got it under control. peace out. I think the board was designed to control the air( going thru the 'noid) using some sort of "Pneumatic Pulse Width MOD." PWM. weird design but itll work for my purposes.

the solenoid needs to keep turning on and off rapidly to feed the ram, must be they dont use accurate regs for the pnumatic ram. once again thanks guys, ive learned alot here. sry warrier i shouldnt have said that stuff. peace.