pause puts me in sleep mode

[EDWARD]

did you read this forum from start to finish?

i know how a transistor works.

what are you talking about seeing how good i can desolder?

there are leads that run under componets, ill need to only desolder 1 board dude.


i have 1000+ of these boards,not connections. so i can get the component data either before or afterwards or any time in between.

i know the code wasnt going to work, it was to try and get an understanding on what NAV ment in his previous post.

yeah i changed a surface mount pcb......not!

oh yeah, could you be anymore condensending??

dont bother replaying warrior cause i dont need help from a jerk. ive been very polite so far and i think i deserve to be talked to better then that.

and for the last time NO F'ING HARDWARE CHANGES!!!

and lets say i dont knw what a diode is or a transitor is, does that give you the right to be a jerk?

you are an idiot warrier. please dont fill up this forum with your trash.

oh yeah, i have a ! button too.

[Warrier]

Edward:

The first thing you learn is to keep your language clean! This is not a tabloid...

It looks as though your willingness to learn or understand technical forum is as good as your soapy language...

You don't run this show and if you can't take some critique then keep digging into your SMD stuff - no one is stopping you.

As for knowing how things work - may be you could take some elementary courses in the English language before you try these forums which are for people with a little more savvy.

Good luck

-warrier

[NavMicroSystems]

Do you really think this is the right place for a conversation like this?

[John C]

Edward is PORTC.2 set to digital using the CMCON Register

[EDWARD]

k thanks for the input guys but i finally got it working today. for some reason the solenoid cant be programmed to stay on for more than a few milla seconds, not sure why this is happening. if I PULSOUT PORTC.2, 10 (ive got a 4mhz osc) itll work, and i havent done too much fiddling around yet but im sure there is maximum PULSOUT time that will work with this design. thanks for all the help guys I do appreciate it. thanks for all the replys NAV. but as for my problem i think i got it under control. peace out. I think the board was designed to control the air( going thru the 'noid) using some sort of "Pneumatic Pulse Width MOD." PWM. weird design but itll work for my purposes.

the solenoid needs to keep turning on and off rapidly to feed the ram, must be they dont use accurate regs for the pnumatic ram. once again thanks guys, ive learned alot here. sry warrier i shouldnt have said that stuff. peace.