Do not take this wrong, but it seems you need to learn a little more about your hardware before you go advanced.
Take a look at the PIC's data sheet under electrical and you will find the voltage vs speed.
|
Re: Ok. It's time to ask about talking/listening to a Raspberry Pi
Do not take this wrong, but it seems you need to learn a little more about your hardware before you go advanced.
Take a look at the PIC's data sheet under electrical and you will find the voltage vs speed.
Dave
Always wear safety glasses while programming.
|
Re: Ok. It's time to ask about talking/listening to a Raspberry Pi
Hmmmn.
I can take a look at the data sheet but not really understand it. What exactly am I looking at? I have always found I can understand about 0.2% of the data sheet.
|
Re: Ok. It's time to ask about talking/listening to a Raspberry Pi
The 18F24K22 has an operating voltage of 1.8 to 3.6 volts as is. When you open the data sheet this information is on page #1 (pdf page #3)
Then look at section 26.
So run the 18F24K22 at the rated voltage and you should be fine.
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks