Hi scalerobotics,
the curve I am trying to obtain is 5 degrees from startup(200) rpm to 1300 rpm. after 1300 the timing advances up to 4000 at 28 degrees.
|
Re: Model engine CDI Autoadvance
Hi scalerobotics,
the curve I am trying to obtain is 5 degrees from startup(200) rpm to 1300 rpm. after 1300 the timing advances up to 4000 at 28 degrees.
Regards
CharlieM
Using PBP3
MCSPX
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks