More help on LOOKUP tables please.

[surfies]

This ON GOTO command, does it work with PBP 2.32 ?? here is part of the code;

COUNT PORTC.3, 15000, c1 'put pulses in C1

ON c1 GOTO S1,S2,S3,S4,S5,S6,S7,S8 I get a syntax error on this line, do I miss something? S1 to S8 is labels, C1 is defined as a variable.
Thanks.

[Acetronics2]

does it work with PBP 2.32 ???

Wowwww !!!

PBP2.32 might be @ least 10 years old ... more than time to upgrade !

my 2.50 version manual does not show ON GOxxx commands ( appears in the v2.60 manual ), sooo ... prepare your

Alain

[surfies]

Aag ja that explains it.
thanks for the help and the quick response, nice to have willing clever people on line.
will just have to make a plan now.

[Acetronics2]

Hi, Surfies

Could have been much easier for us YOU to explain what you physically tried to do ...

I smell some kind of overkill trick here

Alain

[surfies]

There is a push button on portc.3, then depending on how many times its pressed, ( up to 8 times ) the program must then jump to that number's sub routine. I hope that make sense.

[Acetronics2]

then depending on how many times its pressed, ( up to 8 times ) the program must then jump to that number's sub routine.

so ...

a "basic" set of IF ... THEN ... GOTO is the trick.

SELECT CASE is the smart way to write it ... but is it available with v 2.32 ???

LOOKUPx is generally used to retrieve constants/values/strings from a table , not label adresses.

Alain

[surfies]

Yes, IF......THEN's is what I'll have to do , thought I could get away without them.
Thanks a lot for all the help.