Hmmm, try using an external resistor (maybe 4.7K Ohms) and see if you have the same problem. You might be drawing too much current when closing the switch and that might be causing the problem.Originally Posted by HankMcSpank
|
Re: 16f1824 MCLR pin going low causes PIC to reset - what am I missing?
Hmmm, try using an external resistor (maybe 4.7K Ohms) and see if you have the same problem. You might be drawing too much current when closing the switch and that might be causing the problem.
"No one is completely worthless. They can always serve as a bad example."
Anonymous
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks