Is this a 2-wire or 3-wire proximity. As for 3-wire nothing wrong to use resistor devider but for 2-wire, the sensor will not get enough voltage across it or minimum current to function properly.
|
Re: 12V PLC sensor to 3.3V input
Is this a 2-wire or 3-wire proximity. As for 3-wire nothing wrong to use resistor devider but for 2-wire, the sensor will not get enough voltage across it or minimum current to function properly.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks