Using Variables with PAUSE/PWM Commands

Closed Thread
Results 1 to 5 of 5

Hybrid View

  1. - 10th April 2012, 06:10 #1
    HenrikOlsson's Avatar
    HenrikOlsson
    HenrikOlsson is offline Contributor
    Join Date
    Oct 2005
    Location
    Sweden
    Posts
    3,617

    Did you find this post helpful? Yes | No

    Default Re: Using Variables with PAUSE/PWM Commands

    Yeah, they need to be WORD-size variables to fit values larger than 255....
    But if you're not going to change the value at runtime there's no real need to have them as variables, you might as well make them constants:
    Code:
    FLASH_ON CON 1500
FLASH_OFF CON 500
    Saves on both RAM and flash memory.
  2. - 10th April 2012, 12:45 #2
    RossWaddell's Avatar
    RossWaddell
    RossWaddell is offline Member
    Join Date
    Jan 2010
    Posts
    263

    Did you find this post helpful? Yes | No

    Default Re: Using Variables with PAUSE/PWM Commands

    Thanks all! I'll use constants for now but eventually it will read from a pot input.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules