How to debug with MPLAB and PicKit3 with PicBasic Pro 3 - debugging

[Joeygo]

Do you have the Debug Header for the 16F690?
http://www.microchipdirect.com/Produ...words=AC162061

You can't debug a 16F690 the same way as many of the other parts with built-in hardware debuggers.

.

No I don't have a 16F690 debug head... there wasn't any mention of it product information page

OK looks like we need we need AC162961 for debugging.


Another Question
If I have a part with internal debug hardware - can i use PBP3 +MPLAB+PicKit3 to debug this part?


Regards
Joe

[Acetronics2]

.

Another Question
If I have a part with internal debug hardware - can i use PBP3 +MPLAB+PicKit3 to debug this part?

Regards
Joe

Hi, Joe

I think you HAVE to use the special debug head AC162061 ( wich is a higher range processor that simulates the 690 ... no more ! ) the 690 itself is unable of debugging !
The LPC just is a " test board " to learn programming ... without any debugging abilities.

you also could use MPSIM and manually input the ADC result ...

Alain