Powering and reset PIC16LF88 problem

Closed Thread
Results 1 to 4 of 4

Hybrid View

  1. - 27th March 2012, 10:05 #1
    harryweb's Avatar
    harryweb
    harryweb is offline Junior Member
    Join Date
    Sep 2005
    Location
    France
    Posts
    50

    Did you find this post helpful? Yes | No

    Default Re: Powering and reset PIC16LF88 problem

    Hi Charlie,
    Note this diagram does not actually show power connections to the PIC.
    Yes it is because of the ISIS software (hiden powering rails). But power connection is from D1+D2 (common cathode)
    (D3+D4 is used for powering RF and control circuit: not on this shematic)

    Cannot change this... PCB's already made !

    Regards
  2. - 27th March 2012, 14:05 #2
    Charlie's Avatar
    Charlie
    Charlie is offline Senior Member
    Join Date
    Dec 2010
    Posts
    409

    Did you find this post helpful? Yes | No

    Default Re: Powering and reset PIC16LF88 problem

    What supply voltages are you using? (And if the answer is 5V, remove the zener diodes and try again to see if it works.)
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules