I have programmed a 18F4550 by using the PBP2.46 compiler
Only after programming it and usingi a 20 MHZ XTAL

Windows gives this message

"USB DEVICE NOT RECOGNIZED"

My config:

- PIC BASIC PRO 2.46
- GALEP-4 Programmer
- MPASM Assembler

Is there sombody how have the 18F4550 working with windows.
(The 16C745 and 16C765 we're no problem) that's working already.

Is there sombody ho have a schematic of his wiring up from the pic