Multi-digit word variable to string

[astanapane]

in my case i do not use the trackbar, but the LED digits as shown below.



In the software 4D SYstems they have, you can set manually a number for example 167, and will show you the command as shown in the SET DIGIT VALUE:



I have tried to give manually a constant number and it worked!

what i did is:

i set a new var mTEMP ' for manually hex number and
a new var mTEMPIR ' for manually hex number as well.

In our case the number 167 for:

mTEMP = $00
mTEMPIR = $a7

then i did the CS calculation and return to the HSEROUT command.

IRCS=0
IRCS= $01^$0F^$00^mTEMP
IRCS = IRCS ^ mTEMPIR

I placed it with:

HSEROUT [$01,$0F,$00,mTEMP,mTEMPIR,IRCS)

then i got the right result on the display.

The problem is that when i use the variables i cannot get the right values.