Flowcode 5 Anyone?

[Picstar]

Gee, I wish you guys came with English subtitles so that I could understand you.

[Acetronics2]

Hi, "Picstar"

Endly knowing what you try to do ...

the answer is quite simple : use TMR1 and the CCPx module in capture mode for each rising edge ( see relevant Pic datasheet chapter )...

that will trigger an interrupt for each pulse of your speedo ... or simply raise a " data ready " flag ...

just yours to read the CCPR1 registers and store the result elsewhere ...

BTW ... I do not remember having seen ONE compiler offering the " capture " function already cooked ... Flowcode included !!!

Alain

[Picstar]

O.K. Ace, Well I did some online research and found a lot of info and glory be..even examples of what I am trying to do. It is an online book over at Mikroe.com call "Pic Processors:Programming in Basic". There are some slight changes between their version of BASIC and PBP, but very few so far. Thats all I ever wanted was a working example, and picture of course. I see a lot of reading in front of me, so I need to skip to it. Thanks

[Heckler]

Wow! good find on the book... Looks to be a well written text with excellent examples and schematics. Stick with it and you will be rewarded. It's amazing what these little microcontrollers are capable of.