Because nobody's found a problem with it in the last 4 years.
If you use MicroCode Studio, that one is fine.
If you are using MPLAB or MPLAB X, there is a newer version ...
http://support.melabs.com/threads/11...full=1#post415
|
Re: DT_Ints-18
Because nobody's found a problem with it in the last 4 years.
If you use MicroCode Studio, that one is fine.
If you are using MPLAB or MPLAB X, there is a newer version ...
http://support.melabs.com/threads/11...full=1#post415
Last edited by Darrel Taylor; - 3rd March 2012 at 18:47.
DT
|
Re: DT_Ints-18
No surprise there! Wanted to be sure, running a recently clean install of my OS. I'm working with the new Microcode studio and UMC which is really slick.
Thanks for all that you do and contribute on the list etc etc!
|
Re: DT_Ints-18
Is this one backwards compatible? In other words will it still work with MicroCode Studio? (Just worried about tracking which is version where on my machine)Originally Posted by Darrel Taylor
Because nobody's found a problem with it in the last 4 years.
If you use MicroCode Studio, that one is fine.
If you are using MPLAB or MPLAB X, there is a newer version ...
http://support.melabs.com/threads/11...full=1#post415
|
Re: DT_Ints-18
Yes, it will work with MCS too.
DT
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks