Strange problem programming 16f88

Results 1 to 3 of 3

Threaded View

  1. - 2nd March 2012, 15:42 #2
    retepsnikrep's Avatar
    retepsnikrep
    retepsnikrep is offline Member
    Join Date
    Oct 2009
    Posts
    365

    Did you find this post helpful? Yes | No

    Default Re: Strange problem programming 16f88

    The 16F88 has a hideous hardware issue and if you set MCLR to OFF in your CONFIG it becomes almost impossible to program in my experience. You must leave MCLR ON and pull the pin upto 5v with a 10k resistor so you effectively lose a pin.

    You can recover it by tweaking with the programing voltages, but its a royal PITA and there are several threads on the internet and prob on here as well. I buggered up quite a few before I found about it.

    http://www.picbasic.co.uk/forum/showthread.php?t=14568
    Last edited by retepsnikrep; - 2nd March 2012 at 15:49.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules