PicBasic, PicKit2 and configuration...

Closed Thread
Results 1 to 8 of 8

Hybrid View

  1. - 26th February 2012, 17:00 #1
    ScaleRobotics's Avatar
    ScaleRobotics
    ScaleRobotics is offline Prolific Poster
    Join Date
    Feb 2006
    Location
    Gilroy, CA
    Posts
    1,530

    Did you find this post helpful? Yes | No

    Default Re: PicBasic, PicKit2 and configuration...

    Well,

    This works for sure in PBP3 and Pickit2 (just used it). Needs Xinst off and LVP off. Sorry.
    Code:
    #config  ; 18F13K50/14K50  Only 12mhz crystal can be used for USB
    __CONFIG    _CONFIG1L, _CPUDIV_NOCLKDIV_1L & _USBDIV_OFF_1L
    __CONFIG    _CONFIG1H, _FOSC_HS_1H & _PLLEN_ON_1H & _PCLKEN_ON_1H & _FCMEN_OFF_1H & _IESO_OFF_1H
    __CONFIG    _CONFIG4L, _STVREN_ON_4L & _LVP_OFF_4L & _BBSIZ_OFF_4L & _XINST_OFF_4L
#endconfig
    Last edited by ScaleRobotics; - 26th February 2012 at 17:05.
    http://www.scalerobotics.com
  2. - 26th February 2012, 17:15 #2
    RuudNL's Avatar
    RuudNL
    RuudNL is offline Junior Member
    Join Date
    Feb 2012
    Posts
    57

    Did you find this post helpful? Yes | No

    Default Re: PicBasic, PicKit2 and configuration...

    Great! I'll try this later this evening.
    Thanks again for your help!!!
  3. - 26th February 2012, 17:21 #3
    RuudNL's Avatar
    RuudNL
    RuudNL is offline Junior Member
    Join Date
    Feb 2012
    Posts
    57

    Did you find this post helpful? Yes | No

    Default Re: PicBasic, PicKit2 and configuration...

    Just couldn't wait.... It works!!!
    Problem solved.
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules