Looks like your motor ground is isolated from ground by capacitors and DC will not flow through those.
|
Re: Program for controlling analog servo motor using PIC18F452
Looks like your motor ground is isolated from ground by capacitors and DC will not flow through those.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
|
Re: Program for controlling analog servo motor using PIC18F452
Hi,
Moreover your servo is powered between +V and +V ... ( yes, I wrote it fine !!!) ... and the reset pin can't do its job ...
your program won't work fine as servo signal ( 1 to 2 ms pulse ) has to be sent every ~ 20 ms ... and not once every second ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
Members who have read this thread : 1You do not have permission to view the list of names.
Posting Permissions
Bookmarks