TRIAC triggering issues?

[Ioannis]

I suppose you give a negative trigger pulse after the positive one, right?

Better, give us the circuit you built.

Ioannis

[George]

I have the issue solved thanks, i'm still not sure why - but I have it working. Both trigger pulses are only in one direction, gate of triac just hooked upto resistor to PIC pin. It will work if I go negative then positive - or just negative, but just cant go straight into positive. Who knows why - but its working now so I'm happy, thanks guys for looking and yr input

[definitionofis]

The BT131 needs slightly more current for triggering with reversed polarity on the gate, and with reversed polarity on the switching main terminals.
The specification says 20mA typical and 25mA might be needed for some circumstance.
You are only sending 12mA, you said. 5mA to 10mA works for positive gate polarity, says the specification sheet.

(I came here hunting for gate resistor values for BT131 before I turn my circuit on. I am at 100 ohms and thought I might be too low.)