ARRAYWRITE to print acsi string

[Normnet]

I just upgraded to PBP3 because I need to do a bunch of asci strings to an LCD display, and I was told you can do this with arraywrite. Well, I can't get it to work. This code just prints the first letter, how can I make it work?

myarray var byte[20]

arraywrite myarray, ["Hello World",0]
lcdout myarray

Try

For i = 0 to 19
lcdout myarray[i]
Next

Norm

[spcw1234]

I will give that a try, but that will not suit my application. This is how I am trying to write to my 4D Systems display, I was hoping to minimize having to do a bajillion serout commands, and instead setup an array for the text.

myarray var byte[20]

arraywrite myarray, ["Hello World",0]

serout2 tx, baud, ["s", 0, 1, 2, white1, white2, myarray, $00]
gosub wait1 'check for ACK from display

[pedja089]

Try

LCDOUT $FE,$80, STR myarray

[spcw1234]

Thanks! Exactly what I needed!

[pedja089]

Do same for SEROUT2. STR sends bytes until it reaches byte with value 0. So always keep last byte in array cleared, because pbp doesn't check boundary.

[Ioannis]

Or use STR myarray\x where x is the number of bytes.

Ioannis