|
Re: Strange IT behaviour
Demon,
Thank you for your advice.
Of course I did what you suggest : write a very small program and test it and that's how I found that the problem was coming from ReadCode and its execution time.
After 40 years spent in the lab I know the methodology, thanks !
I am just asking for a precise advice/recommandation to the issue I raised. In relation with ReadCode and the interrupts. Nothing else
MikeBZH
|
Re: Strange IT behaviour
May I suggest that you take a look at this link:
http://www.picbasic.co.uk/forum/showthread.php?t=3891
Last edited by sayzer; - 9th February 2012 at 08:44.
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
Re: Strange IT behaviour
I asked directly Darrel Taylor (Technical Support) and he gave be the good answer :
I simply need to clear the interrupt flag (TMR2IF) in PIR1 before leaving the Interrupt Service Routine
Otherwise, the ISR is called again and again. No relation with ReadCode execution time.
Many thanks to you, Darrel.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks