|
Re: Getting 18F458 to blink
It may be working just perfect. In your loop the first thing you do is toggle the led. Then you pause for half a second. Then you set the output low and instantly go back to the top of the loop, where you will toggle again turning on the led. As was suggested, remove the low led command. Or you could add another pause after it so you will have time to see it go low.
-Bert
The glass is not half full or half empty, Its twice as big as needed for the job!
http://foamcasualty.com/ - Warbird R/C scratch building with foam!
|
Re: Getting 18F458 to blink
All three of you where right. Thank you all. Deleted the "LED low" command (wich I added after nothing happened). Added "CMCON = 7" as Shawn suggested. Now it works. Grrrmmm three lousy bits, many days no sleep...
@Demon: Both ways work. But if the CONFIG is in the include file, it mustn't be in the program and vice versa.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks